What the ASTRA Filter (x3) Does
The ASTRA Filter (x3) is a set of replacement filter cartridges designed for the Astra pet water fountain. Each cartridge uses a triple filtration system: a non-woven fabric layer captures debris and dirt, ion exchange resins reduce calcium content to prevent limescale build-up, and activated carbon neutralises odours and improves taste. The result is clear, fresh, impurity-free water for your dog or cat.
This guide covers how to install a new filter cartridge, how often to replace it, and what to keep in mind for multiple pets.
What the Records Confirm
- ASTRA Filter (x3): The kit includes three replacement filters, providing up to six weeks of continuous use (depending on the number of pets and usage conditions). Knowing the expected lifespan helps you plan replacement intervals and budget for ongoing maintenance.

ASTRA Filter (x3) - ASTRA Filter (x3): To maintain the proper functioning of the fountain and keep the water clean, it is recommended to replace the filter every two weeks or when the water flow decreases noticeably. Regular replacement prevents clogging and ensures the fountain continues to circulate and filter water effectively.
- ASTRA Filter (x3): The intuitive design of the filters makes them easy to install, simplifying the maintenance of your Astra fountain. No special tools or complicated steps are required, so you can quickly swap out old filters.
How to Replace the ASTRA Filter Cartridge
Follow these steps each time you replace a filter in your Astra fountain. The process is straightforward and takes only a few minutes.
- Turn off and unplug the fountain: Always disconnect the power before handling any part of the water fountain to avoid electrical hazards or damage to the pump.
- Remove the old filter cartridge: Open the fountain compartment that holds the filter. Discard the used cartridge responsibly.
- Rinse the new cartridge (optional): If you prefer, briefly rinse the new filter under cool running water to remove any loose dust from the activated carbon. Do not use soap or detergent.
- Insert the new filter cartridge: Place the cartridge into the designated slot in the fountain. Ensure it sits securely and is oriented correctly (the non-woven fabric layer should face the incoming water flow).
- Reassemble and refill the fountain: Put the fountain cover back in place and fill the reservoir with fresh, clean water.
- Plug in and check flow: Reconnect the power. Observe the water flow – if it seems weak, check that the filter is properly seated and not blocked.
When to Replace the Filter
The recommended replacement interval is every two weeks, or sooner if you notice a decrease in water flow. If you have two or more pets, more frequent replacement may be necessary because the filter works harder to keep water clean. The three-pack provides up to six weeks of continuous use under normal conditions.
Alongside filter changes, regular cleaning of the fountain is advised to remove any residues and preserve the system’s efficiency. Refer to your Astra fountain manual for specific cleaning instructions.
Compatibility and Important Notes
These filters are exclusively designed for the Astra dog and cat fountain by Ferplast. They are not compatible with other fountains or filtration systems. The filters are crafted from high-quality, safe, and environmentally friendly materials, ensuring maximum safety and peace of mind for your pet.
The supplied information does not include specific cleaning steps for the fountain itself, nor does it cover the pump or other components. For full maintenance, consult the Astra fountain instruction manual.


