How to Install and Clean a Car Seat Cover for Dogs

Quick answer

To protect your car seats from fur, dirt, and scratches, install a waxed fabric cover like the Ferplast Car Seat Cover using the built-in straps and seatbelt slots, then clean it regularly with a vacuum and damp cloth.

Step-by-step installation and cleaning

1. Step 1: Prepare the seat: Remove any loose items from the seat and fold the headrest forward if possible. This gives you a flat surface to work with. A clean, empty seat prevents wrinkles that could let dirt sneak underneath.
2. Step 2: Drape and secure the cover: Place the Ferplast Car Seat Cover over the seat with the waxed side facing up. Feed the straps around the headrest posts (or seat back, depending on your car) and tighten them evenly. Make sure the cover lies flat without sagging. Uneven tension can cause the cover to slide during travel, so check both sides before moving on.
3. Step 3: Route the seatbelt through the slots: Pull the car's seatbelt through the designated slots on the cover. This allows you to buckle your dog's harness directly to the car belt, keeping the cover in place while restraining your pet. If you skip this step, the cover may bunch up and the harness won't anchor properly.
4. Step 4: Daily cleaning and spot treatment: After each trip, shake the cover outside to remove loose fur and debris. For light stains, wipe the waxed fabric with a damp microfiber cloth. For heavier dirt, use a mild soap solution and rinse with a clean damp cloth. Avoid machine washing, as it can damage the wax coating. Never use bleach or harsh detergents; they strip the wax finish and reduce water resistance.

Product facts

• CAR SEAT COVER: Made from waxed fabric with tough edges and reinforced nylon corners, it comes with straps for front or rear seats and slots for seatbelt buckles. The waxed finish repels light moisture and dirt, while the reinforced corners prevent tears from dog claws, so the cover lasts through many trips.